Signal - Revision history

Kaaai: /* No-way [5] */

2024-09-29T23:15:12Z

No-way [5]

← Older revision		Revision as of 23:15, 29 September 2024
Line 48:		Line 48:
	==== No-way [5]====		==== No-way [5]====
	[[File:No way signal menu 1.14.png\|thumb\|No-way signal menu]]		[[File:No way signal menu 1.14.png\|thumb\|No-way signal menu]]
	This signal blocks trains from passing over it. There is a option to change the mode of the ~~signals~~ and a ~~field~~ to assign tags to ~~the signal~~.<br>		This signal blocks trains from passing over it. There is an option to change the mode of the signal and a panel to assign tags to it.<br>
	The two options and how they interact with tagged trains:<br>		The two options and how they interact with tagged trains:<br>
	''Applies to all trains:''Without a assigned tag to the signal, any train will be blocked from passing it. If you assign a tag, all trains with ~~that~~ tag will be able to pass the signal. <br>		''Applies to all trains:''Without an assigned tag to the signal, any train will be blocked from passing it. If you assign a tag, all trains with the same tag will be able to pass the signal. <br>
	''Ignored by all trains:''Without a assigned tag to the signal, every train can pass the signal. If you assign a tag, all trains with ~~that~~ tag will be blocked from passing the signal.		''Ignored by all trains:''Without an assigned tag to the signal, every train can pass the signal. If you assign a tag, all trains with the same tag will be blocked from passing the signal.


	==== Block signal (Removed from the game)====		==== Block signal (Removed from the game)====
	When a train arrives at this signal, it will check if the block is clear of other trains, if it is, it will proceed. If it's not, it will stop at the signal and check again in the future until it becomes clear. After the train proceeds past the signal it reserves the whole block of track for itself, until the next block signal or block balise. As of now it is removed from the game.		When a train arrives at this signal, it will check if the block is clear of other trains, if it is, it will proceed. If it's not, it will stop at the signal and check again in the future until it becomes clear. After the train proceeds past the signal it reserves the whole block of track for itself, until the next block signal or block balise. As of now it is removed from the game.

Kaaai: /* Path signal [4] */

2024-09-29T23:13:29Z

Path signal [4]

← Older revision		Revision as of 23:13, 29 September 2024
Line 37:		Line 37:
	==== Path signal [4]====		==== Path signal [4]====
	[[File:Path signal menu 1.14.png\|thumb\|Path signal menu]]		[[File:Path signal menu 1.14.png\|thumb\|Path signal menu]]
	When a train arrives at this signal, the signal will check the [[path]] of the train (visible in a map mode)~~, and if~~ this ~~train~~ intersects with another train's path, the train will be stopped and the signal will turn red. The signal will check again until ~~it can give~~ the train ~~a green light~~. The path of the path signal ~~that it checks, will end if it hits a balise~~ or ~~a one way signal, that looks against~~ the ~~direction of~~ the ~~path~~. <br>		When a train arrives at this signal, the signal will check the [[path]] of the train (visible in a map mode). If this path intersects with another train's path, the train will be stopped and the signal will turn red. The signal will check again until the path is cleared and lets the train pass afterwards. The path signal will check the path up to the next path signal facing the same direction or the next balise along the track. <br>
	The bound option: <br>		The bound option: <br>
	''Only for same direction:''This is the default option. The signal will let ~~every path~~ through that is against its own direction, but block every path that is in the same direction. <br>		''Only for same direction:''This is the default option. The signal will let paths through that are against its own direction, but block every path that is going the same direction. <br>
	''Always:''The signal will block every path ~~form very~~ signal, ignoring their direction. It can also be used by trains from both sides. <br>		''Always:''The signal will block every path from every signal, ignoring their direction. It can also be used by trains from both sides. <br>

	As with the ~~Balise~~, there is a cosmetic option to shift the signal to either side. <br>		As with the balise, there is a cosmetic option to shift the signal to either side. <br>
	There is also an option to set a time after which you will be alerted about a waiting train. ~~The default option~~ is ~~the~~ global setting, ~~which~~ you ~~can change in the settings. You~~ can also set a custom time between ~~1 minute~~ and 24 hours.		There is also an option to set a time after which you will be alerted about a waiting train. This is a global setting, and will be the same in every save, you can also set a custom time between 0 minutes (which alerts you instantly) and 24 hours.
	<br>		<br>



	==== No-way [5]====		==== No-way [5]====

Kaaai: /* Block balise [3] */

2024-09-29T23:00:59Z

Block balise [3]

← Older revision		Revision as of 23:00, 29 September 2024
Line 28:		Line 28:

	==== Block balise [3]====		==== Block balise [3]====
	Block balises stop a train path check or path reservation from going beyond their point in the track, from both directions.		Block balises stop a train path check or path reservation from going beyond their point on the track, that happens from both directions.
	There are additional options accessible, if you select the signal. The second one allows you to shift the balise to the side of the track, it is purely cosmetic.		There are additional options accessible, if you select the signal. The second one allows you to shift the balise to the side of the track, which is purely a cosmetic option and has no gameplay effect.
	The third option lets you choose how the balise should work. The option ~~already~~ selected is the most frequently used option and behaves as described above. There is also a ~~field~~ where you can assign tags to the balise. <br>		The third option lets you choose how the balise should work. The option selected by default is the most frequently used option and behaves as described above. There is also a panel where you can assign tags to the balise. <br>
	The two options and how they interact with tagged trains:<br>		The two options and how they interact with tagged trains are:<br>
	''Applies to all trains:'' This is the default option. If you ~~now~~ assign tags to the balise, it will work normally for all trains that do not have ~~this tag~~ assigned, but it will ~~not~~ be ~~seen as a balise~~ by trains that do have the tags. <br>		''Applies to all trains:'' This is the default option. If you assign tags to the balise, it will work normally for all trains that do not have any same tags assigned, but it will be ignored by trains that do have at least one of the tags. <br>
	''Ignored by all trains:'' If you select this option, the balise will be ignored by all trains without a selected tag, but will ~~be seen as~~ a normal balise by any train that has ~~a selected~~ tag.		''Ignored by all trains:'' If you select this option, the balise will be ignored by all trains without a selected tag, but will work like a normal balise for any train, that has at least one tag in common with the balise.


	==== Path signal [4]====		==== Path signal [4]====

Kaaai: /* Platform train stop point [2] */

2024-09-29T22:52:38Z

Platform train stop point [2]

← Older revision		Revision as of 22:52, 29 September 2024
Line 25:		Line 25:

	==== Platform train stop point [2]====		==== Platform train stop point [2]====
	If you place this signal, trains will stop at it, when you assign the platform via basic stop assignment mode.		If you place this signal on a platform track, trains will stop at it, when you assign the platform via basic stop assignment mode.


	==== Block balise [3]====		==== Block balise [3]====

Kaaai: /* One way [1] */

2024-09-29T22:51:46Z

One way [1]

← Older revision		Revision as of 22:51, 29 September 2024
Line 19:		Line 19:
	</gallery>		</gallery>
	==== One way [1]====		==== One way [1]====
	This signal only allows trains to travel in the direction of the arrow. it will also block all paths of path signals that are against its own direction.		This signal only allows trains to travel in the direction of the arrow. It will also block all paths of path signals that are against its own direction.


	[[File:Block balise menu 1.14.png\|thumb\|Block balise menu]]		[[File:Block balise menu 1.14.png\|thumb\|Block balise menu]]

	==== Platform train stop point [2]====		==== Platform train stop point [2]====
	If you place this signal, trains will stop at it, when you assign the platform via basic stop assignment mode.		If you place this signal, trains will stop at it, when you assign the platform via basic stop assignment mode.

Kaaai: /* Signal menu */

2024-09-29T22:50:44Z

Signal menu

← Older revision		Revision as of 22:50, 29 September 2024
Line 4:		Line 4:
	== Signal menu ==		== Signal menu ==
	The signal menu is accessible in the [[How to build track\|track editor]] [F2] and has two different modes:		The signal menu is accessible in the [[How to build track\|track editor]] [F2] and has two different modes:
	*'''Move, delete, edit signals''' [K]: This mode allows you to move, delete and edit signals. You can move them by selecting ~~them~~ and then just dragging them ~~and~~ delete ~~them when~~ selected by pressing [delete]. Every signal type has an own menu ~~to edit them~~, you can access it by by selecting the signal and looking at the ~~let~~ top ~~side~~. There you can change the type of the signal, flip it or ~~have~~ additional settings. Pressing [F] while signals are selected will flip them.		*'''Move, delete, edit signals''' [K]: This mode allows you to move, delete and edit signals. You can move them by selecting and then just dragging them along the track or delete selected signals by pressing [delete]. Every signal type has its own menu for editing the properties, you can access it by selecting the signal and looking at the menu on the top left. There you can change the type of the signal, flip it or edit additional settings. Pressing [F] while signals are selected will also flip them.
	*'''Create new Signals''' [L]: This mode allows to create new signals.		*'''Create new Signals''' [L]: This mode allows to create new signals.
	<gallery>		<gallery>

Schatty: /* Signal menu */

2024-09-20T18:01:26Z

Signal menu

← Older revision		Revision as of 18:01, 20 September 2024
Line 4:		Line 4:
	== Signal menu ==		== Signal menu ==
	The signal menu is accessible in the [[How to build track\|track editor]] [F2] and has two different modes:		The signal menu is accessible in the [[How to build track\|track editor]] [F2] and has two different modes:
	*'''Move, delete, edit signals''' [K]: This mode allows you to move, delete and edit signals. You can move them by selecting them and then just dragging them and delete them when pressing [delete]. Every signal type has an own menu to edit them, you can access it by by selecting the signal and looking at the let top side. There you can change the type of the signal, flip it or have additional settings. Pressing [F] while signals are selected will flip them.		*'''Move, delete, edit signals''' [K]: This mode allows you to move, delete and edit signals. You can move them by selecting them and then just dragging them and delete them when selected by pressing [delete]. Every signal type has an own menu to edit them, you can access it by by selecting the signal and looking at the let top side. There you can change the type of the signal, flip it or have additional settings. Pressing [F] while signals are selected will flip them.
	*'''Create new Signals''' [L]: This mode allows to create new signals.		*'''Create new Signals''' [L]: This mode allows to create new signals.
	<gallery>		<gallery>

Schatty: /* Signal types */

2024-09-20T17:48:51Z

Signal types

← Older revision		Revision as of 17:48, 20 September 2024
Line 22:		Line 22:


			[[File:Block balise menu 1.14.png\|thumb\|Block balise menu]]
	==== Platform train stop point [2]====		==== Platform train stop point [2]====
	If you place this signal, trains will stop at it, when you assign the platform via basic stop assignment mode.		If you place this signal, trains will stop at it, when you assign the platform via basic stop assignment mode.
Line 27:		Line 28:

	==== Block balise [3]====		==== Block balise [3]====
	~~[[File:Block balise menu 1.14.png\|thumb\|Block balise menu]]~~
	Block balises stop a train path check or path reservation from going beyond their point in the track, from both directions.		Block balises stop a train path check or path reservation from going beyond their point in the track, from both directions.
	There are additional options accessible, if you select the signal. The second one allows you to shift the balise to the side of the track, it is purely cosmetic.		There are additional options accessible, if you select the signal. The second one allows you to shift the balise to the side of the track, it is purely cosmetic.

Schatty: /* Signal types */

2024-09-20T17:47:32Z

Signal types

← Older revision		Revision as of 17:47, 20 September 2024
Line 12:		Line 12:
	== Signal types ==		== Signal types ==
	<gallery>		<gallery>
	One way signal 1.14.png~~\|50px~~\|thumb\|One way signal		One way signal 1.14.png\|thumb\|One way signal
	Platform train stop point 1.14.png~~\|50px~~\|thumb\|Platform train stop point		Platform train stop point 1.14.png\|thumb\|Platform train stop point
	Block balise 1.14.png~~\|50px~~\|thumb\|Block balise		Block balise 1.14.png\|thumb\|Block balise
	Path signal 1.14.png~~\|50px~~\|thumb\|Path signal (unbound)		Path signal 1.14.png\|thumb\|Path signal (unbound)
	No way signal 1.14.png~~\|50px~~\|thumb\|No-way signal		No way signal 1.14.png\|thumb\|No-way signal
	</gallery>		</gallery>
	==== One way [1]====		==== One way [1]====

Schatty: /* Signal types */

2024-09-20T17:46:19Z

Signal types

← Older revision		Revision as of 17:46, 20 September 2024
Line 12:		Line 12:
	== Signal types ==		== Signal types ==
	<gallery>		<gallery>
	One way signal 1.14.png\|thumb\|One way signal		One way signal 1.14.png\|50px\|thumb\|One way signal
	Platform train stop point 1.14.png\|thumb\|Platform train stop point		Platform train stop point 1.14.png\|50px\|thumb\|Platform train stop point
	Block balise 1.14.png\|thumb\|Block balise		Block balise 1.14.png\|50px\|thumb\|Block balise
	Path signal 1.14.png\|thumb\|Path signal (unbound)		Path signal 1.14.png\|50px\|thumb\|Path signal (unbound)
	No way signal 1.14.png\|thumb\|No-way signal		No way signal 1.14.png\|50px\|thumb\|No-way signal
	</gallery>		</gallery>
	==== One way [1]====		==== One way [1]====